Delta Technology (Chongqing) Co., Ltd.
Quality Assurance, Service Priority.
Add to Cart
XDC Battery Discharge Charge Lithium Ion Battery Test Equipment
Brief Introduction:
XDC Wide Voltage Battery Discharge Charge Lithium Ion Battery Test Equipment can serve as discharge loads and realize discharge with the set constant currents by means of continuous control over discharge currents.
When the voltage of a battery pack or a single battery is lower than the limit of voltage, or the set discharge duration or reaches the set discharge capacity during discharge, the tester will automatically stop discharge and record the real-time data of all valuable and continuous processes.
The voltage information of single batteries monitored by the tester is subject to wireless repeater access that is simple, secure and accurate.
With strong software, the setup and data treatment can be done through the touch screen. The process data can be read and uploaded to a computer for analysis.
Main Parameters:
| Item Name | XDC Wide Voltage Battery Discharge Charge Lithium Ion Battery Test Equipment |
| Applicable battery | Lead-acid battery |
| Output voltage | DC10-300V |
| Output current | 10~19V: 0~50A 19~180V: 0~100A 180~300V: 0~50A |
| Operating mode | Use the tester independently or with a constant-current module |
| Protection performance | Input terminal overvoltage protection, prompts on the LCD; Reverse polarity protection, buzzer alarm; Overcurrent protection, prompts on the LCD; 85ºC overheat protection, prompts on the LCD, buzzer alarm. |
| Single battery voltage acquisition | The 433RF wireless module supports a communication distance longer than 100 m and monitoring for single battery voltages of 2V, 4V, 6V and 12V. If the total voltage is not beyond the set value, each battery pack will have an unlimited single battery quantity and can monitor one to sixteen RF wireless monitoring modules at the same time. One RF wireless monitoring module can monitor 12 single batteries at the same time. |
| Control accuracy | Discharge current: ≤±1%; battery pack's terminal voltage: ≤ ±0.5%; single battery voltage: ≤±0.1% |
| Communication with PC | RS485 interface |
| Data storage | 2Gbit FLASH |
| Operating conditions | |
| Cooling | Forced air cooling |
| Temperature | Operating temperature: -5~50ºC; storage temperature: -40~70ºC |
| Humidity | Relative humidity: 0~90% (40±2ºC) |
| Noise | <60dB |
| Operating power supply | |
| Voltage | 220V AC (-20%~+30%); frequency: 45~65Hz; |
| Withstand voltage test | Input--casing: 2200Vdc 1min Input--output: 2200Vdc 1min Output--casing: 700Vdc 1min |
| Safety | Compliance line with EN610950 |
| Wiring | |
| AC output | Male socket in line with the applicable national standard, applicable to 1~1.5mm2 cable |
| DC output | 25mm2 cable quick plug (red: positive; black: negative) |
