
Add to Cart
Transformer oil is very important to the reliability, performance, and lifetime of a transformer. The oil should be free from moisture, dissolved gases, particles, etc. Even some new oils may require treatment to an acceptable level before being injected into the transformer;
Our ZJA 6000L/H Hot Sale Two Stage Vacuum Transformer Oil Purifying Machine is professional for the treatment of transformer oil, It can efficiently remove water, gases, acid, particles, etc. from the oil.
With the advantages of a high working vacuum, high filtration speed, and oil quality protection, the filter advanced the oil treatment technique and equipment performance and can raise the puncture voltage to over 35V.
ZJA 6000L/H Hot Sale Two Stage Vacuum Transformer Oil Purifying Machine can be installed by sealed regular or movable with a trailer, so it is suitable to treat oil, fill oil in a vacuum chamber, and circulate dry hot oil when the large transformer is being installed and overhauled.
Parameters | Unit | 1.8KY | 3KY | 6KY | 9KY | 12KY | 18KY |
Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 18000 |
Working Vacuity | Pa | ≤80 | ≤80 | ≤80 | ≤80 | ≤80 | ≤80 |
Working Pressure | Mpa | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
Temperature Range | ºC | 45-65 | 45-65 | 45-65 | 45-65 | 45-65 | 45-65 |
Power Supply | 50Hz | 380V | 3-Phase | 4-Wire | or as request | ||
Total Power | KW | 16 | 36 | 70 | 100 | 150 | 200 |
Inlet/Outlet Diameter | mm | 20/20 | 25/25 | 32/32 | 40/40 | 50/50 | 65/65 |
Length | mm | 1600 | 1800 | 2200 | 2500 | 2800 | 3450 |
Width | mm | 1250 | 1450 | 1600 | 1950 | 2150 | 2600 |
Height | mm | 2000 | 2200 | 2450 | 2700 | 3000 | 3000 |
Weight | Kg | 500 | 700 | 1460 | 1800 | 2400 | 4000 |
One pot with a two-stage vacuum-segregating space comes under different pressure to keep the oil line balanced between the two stages.
Imported vacuum pumps from Europe have the highest level in the world and high air pump speed guarantees high working vacuity.
The new technology of vacuum-segregating adopts a particular spinning disk and stainless steel machine with a dehydration and air pump.
Using a new type of heating equipment which can reduce heating burthen and extend oil life.
Oil level control adopts the photoelectric way in which the main components are imported from Switzerland.
Customers can choose equipment equipped with all or partly imported components.
It's equipped with filter assemblies imported from Italy.
All pumps must be airproofed by our factory, moreover running without noise and leakage. extended oil life.